Wall Hung Gas Boiler Circulation Pump 230V 45W 6m Head 40Lmin Low Noise

Main Product Advantages

• Maximum head reference of 6 meters
• Maximum flow reference of 40L per minute
• 230V AC 50Hz electrical configuration
• 45W efficient motor power
• Single stage pump structure
• Automatic start and stop function
• Adjustable speed operation
• Overload protection
• Overheat protection
• Low noise operation
• Suitable for compatible wall mounted gas boiler systems
• One year standard manufacturer warranty
• 1 percent fragile spare parts according to the supply agreement
• OEM and ODM project discussion support

6m Maximum Head for Extended Heating Layouts

The maximum head describes the pump’s ability to move water through a vertical height and the resistance created by pipes, valves, radiators, filters, and heat exchangers. This pump provides a maximum head reference of 6 meters, offering additional circulation capability for compatible heating systems that need more than a compact 5m head solution.

A 6m head pump can support selected wall mounted boiler layouts with longer pipe runs, increased heating zones, or greater installation height. It helps move heated water through the system and supports more balanced heat distribution when the pump is correctly matched with the system curve.

The head value should not be considered independently. Actual performance depends on pipe diameter, pipe length, bends, valves, radiator quantity, heat exchanger resistance, system pressure, water condition, and pump speed. Professional system calculation is recommended before final selection.

40L per Minute Flow Capacity Reference

The maximum flow reference is 40L per minute according to the supplied specification. This flow capability supports compatible boiler heating systems that require stable circulation through radiators, heating loops, and heat transfer components.

Actual flow changes according to system resistance and operating conditions. At higher resistance, the flow rate may be lower than the maximum reference. Adjustable speed operation allows the installer or control system to select a suitable circulation level for the heating layout.

For OEM customers, the pump can be evaluated against the required flow and head curve of the target boiler system. This helps confirm that the pump delivers suitable circulation without unnecessary power consumption or excessive system noise.

Automatic Start and Stop for Demand Based Operation

The pump can automatically start and stop according to the heating demand of the wall mounted boiler. When the control system requires water circulation, the pump can begin operation. When circulation is no longer required, the system can stop the pump to reduce unnecessary energy use.

Automatic operation supports better coordination between the boiler, temperature sensors, thermostat, gas burner, and heating circuit. It also reduces the need for constant manual adjustment and provides a more convenient operating experience for residential customers.

The exact start and stop logic depends on the boiler control board, system thermostat, sensor configuration, and wiring arrangement. These details should be confirmed during technical integration.

Adjustable Speed for Different Heating Zones

Heating systems differ in pipe length, radiator quantity, floor heating loop design, and water resistance. A single fixed speed may not be suitable for every installation. Adjustable speed operation provides more flexibility during system commissioning and daily operation.

Speed adjustment can help support:

• Taller heating system layouts
• Longer pipe runs
• Multiple radiator zones
• Different seasonal heating demands
• Reduced circulation noise during low demand
• More balanced heating water distribution
• Efficient system commissioning

The exact speed control method should be confirmed according to the selected model. Control may be managed by the boiler system, an external setting, or a model-specific adjustment mechanism.

Overload and Overheat Protection for Motor Safety

A circulation pump may face abnormal conditions such as blocked flow, air in the system, closed valves, mechanical resistance, or continuous operation under excessive load. These conditions can increase motor temperature and affect service life.

The pump includes overload and overheat protection according to the supplied product features. These functions help protect the motor and reduce the risk of damage during abnormal operating conditions.

Protection functions do not replace correct installation. The heating system should be filled, vented, filtered, and checked before operation. The installer should also confirm that the pump is installed in the correct flow direction.

Low Noise Operation for Residential Environments

Wall mounted boilers are often installed near bedrooms, kitchens, living rooms, and apartments. Excessive pump noise can affect the user experience even when the heating system produces sufficient heat.

The pump is designed for low noise operation through an efficient motor structure and stable circulation design. Actual noise depends on pump speed, air in the heating circuit, water quality, pipe vibration, installation support, and system maintenance.

Correct system venting and secure mounting can help maintain quiet and stable operation over time.

22 Years of Manufacturing Experience

You work with a company that has been focused on home appliance development and manufacturing for over 22 years. This experience allows us to understand market demands, improve product performance, and maintain stable production standards. Whether you are launching a new product line or expanding your existing business, you can rely on a partner with proven industry expertise.

Strict ISO 9001 Quality Management

You can have confidence in every product you receive. Our ISO 9001-certified quality management system covers every stage of production, from raw material inspection and component testing to in-process quality control and final product inspection. This helps ensure consistent quality and reduces the risk of after-sales issues for your business.

Trusted by Customers Worldwide

You benefit from products that are already serving customers across North America, South America, Europe, Russia, Africa, and other international markets. This global experience helps us better understand different market requirements and allows you to source products with proven acceptance and performance.

One-Stop OEM & ODM Service

You can simplify your sourcing process with complete OEM and ODM support. From product design and component selection to packaging, branding, and final production, our team works closely with you to develop products that match your market needs and brand positioning.

Modern Production Facilities

You benefit from advanced production equipment and well-organized manufacturing lines designed to improve efficiency and product consistency. This helps ensure stable quality and reliable production schedules, even during peak seasons.

Professional Research and Development Team

You gain access to an experienced engineering team focused on product innovation and continuous improvement. Whether you need product customization, technical upgrades, or new product development, we can help turn your ideas into market-ready solutions.

Comprehensive Quality Testing

You receive products that go through multiple testing procedures before shipment. These include performance testing, safety inspections, durability checks, gas leakage testing, and final quality verification. Our goal is to make sure every unit performs as expected when it reaches your customers.

Certification Support for Global Markets

You can source products designed to meet the requirements of different countries and regions. Our team understands international compliance standards and can support certification needs to help you enter new markets more efficiently.

Flexible Customization Options

You can customize product appearance, technical specifications, packaging, manuals, labels, logos, and other details based on your business requirements. This flexibility helps you create products that stand out in your target market.

Stable Production Capacity

You can count on us whether you need a small trial order or a large-volume purchase. Our manufacturing capacity is designed to support growing businesses and long-term cooperation without compromising quality or delivery performance.

Efficient Export and Logistics Support

You benefit from years of export experience and professional logistics coordination. From packaging and documentation to shipment arrangements, our team helps ensure your orders arrive safely and efficiently.

Reliable Spare Parts Supply

You can reduce maintenance concerns with long-term spare parts availability. We provide support for replacement components and accessories, helping you maintain product performance and improve customer satisfaction after purchase.

Responsive After-Sales Service

You are supported by a dedicated team that responds quickly to questions and technical inquiries. Whether you need product information, troubleshooting assistance, or spare parts support, we are committed to helping you resolve issues efficiently.

Multi-Market Business Support

You work with a partner familiar with different customer preferences, product standards, and business practices across global markets. This experience helps you reduce sourcing risks and improve your competitiveness.

Long-Term Partnership Focus

You gain more than a product supplier. You gain a manufacturing partner committed to supporting your business growth, helping you improve operational efficiency, strengthen your brand, and build long-term success in your market.

High After-Sales Rate

You need products that perform reliably after they reach your customers. Vangood follows strict quality control procedures throughout the entire production process, from component inspection to final product testing. This helps You reduce returns, warranty claims and after-sales costs while improving customer satisfaction.

Unstable Quality

You should never have to worry about inconsistent product quality from one order to the next. Vangood operates under a comprehensive quality management system to ensure every batch meets the same standards, giving You confidence in every shipment.

Insufficient Certifications

You may face challenges when entering different markets without the proper certifications. Vangood provides CE-certified products and supports compliance requirements, helping You bring products to market more smoothly and with fewer obstacles.

Unstable Water Temperature

Your customers expect a comfortable and reliable hot water experience. Vangood uses stable heating and combustion technology to help You provide consistent hot water performance in a wide range of operating conditions.

Poor Low Water Pressure Performance

Many outdoor and remote locations have limited water pressure. Vangood water heaters are designed to operate under low water pressure conditions, allowing You to serve camping, RV, caravan, farm and off-grid markets more effectively.

High Gas Consumption

Rising energy costs can impact both You and Your customers. Vangood focuses on improving thermal efficiency and optimizing combustion performance, helping You offer products that deliver reliable hot water while reducing fuel consumption.

Difficult Installation

Complicated installation can lead to customer complaints and additional support requests. Vangood provides complete accessories, user-friendly designs and clear installation guidance, making setup easier for You and Your customers.

Limited Spare Parts Support

Reliable spare parts availability is essential for long-term business success. Vangood maintains ongoing support for key components and accessories, helping You simplify maintenance, repairs and after-sales service.

Long Lead Times

You need a supplier that can keep up with your business schedule. With mature production management and a stable supply chain, Vangood helps You reduce delays and maintain consistent inventory levels throughout the year.

Limited OEM & ODM Capabilities

Every market is different, and Your products should reflect that. Vangood offers flexible OEM and ODM services, allowing You to customize logos, packaging, product specifications and appearance to better match Your brand and target customers.

Transportation Damage Risks

Damaged products create unnecessary costs and customer dissatisfaction. Vangood uses reinforced packaging solutions and export-ready packing standards to help You minimize shipping damage and ensure products arrive in good condition.

Slow After-Sales Response

When issues arise, You need support you can count on. Vangood provides responsive communication and professional customer service, helping You get answers quickly and resolve problems efficiently so Your business can keep moving forward.

Take Action Now

If You are looking for a reliable gas water heater supplier, now is a great time to get in touch. Simply share Your product requirements, target market or project details, and our team will provide detailed specifications, product recommendations and suitable OEM/ODM solutions to help You move forward with confidence.

Request a Quote

Whether You are sourcing for distribution, retail, e-commerce or project procurement, You are welcome to send us an inquiry at any time. We will provide competitive pricing, product information and professional support, helping You evaluate the best solution for Your business needs.

Start Your Business Partnership

You deserve a manufacturing partner that supports Your long-term growth. By working with Vangood, You gain access to stable production capacity, reliable product quality and responsive service. We are committed to building long-term cooperation that helps Your business grow steadily and sustainably.

Get Customized Solutions

Every market has different requirements, and every brand has unique goals. If You need customized specifications, packaging, logos, accessories or product features, simply share Your ideas with us. Our team will work closely with You to develop a solution that fits Your market and strengthens Your brand identity.

Contact Us Today

If You have questions about products, certifications, lead times or customization options, our team is ready to help. You can contact us directly for fast communication, technical support, product catalogs and professional recommendations based on Your specific requirements.

Discuss Your Project With Us

Whether You are launching a new product line, expanding Your distribution network or sourcing for a large project, we would be happy to learn more about Your plans. By understanding Your business goals, we can recommend the most suitable products and services to help You achieve better results.

Grow Your Business With Confidence

Choosing the right supplier can make a significant difference to Your success. With years of manufacturing experience, strict quality control and global export expertise, Vangood is ready to support You with reliable products and dependable service every step of the way.

Q: Are you a trading company or a manufacturer?
A: We are a professional manufacturer located in Dongfeng Town, Zhongshan City, Guangdong, China. With more than 22 years of experience in home appliance production and R&D, we specialize in gas water heaters, electric water heaters, gas boilers, gas stoves, range hoods, and other kitchen appliances. We warmly welcome customers from around the world to visit our factory and discuss cooperation opportunities.

Q: What is your MOQ?
A: Our MOQ depends on the product model and customization requirements. We offer flexible MOQ options and support trial orders, allowing you to evaluate product quality and market potential before placing larger orders.

Q: What is your lead time?
A: For first-time orders, the production lead time is usually 35–45 days after confirming all order details. For repeat orders, the lead time is typically 25–35 days. The exact schedule depends on order quantity, product specifications, and customization requirements.

Q: Do you provide samples? Are they free?
A: Yes, we provide samples for quality evaluation and testing. The sample price is usually 1.5 times the unit price. However, the sample cost can be refunded in your first bulk production order, helping reduce your initial purchasing risk.

Q: What are your payment terms?
A: For payments ≤ USD 1,000, 100% payment is required in advance. For payments ≥ USD 1,000, we accept 30% T/T deposit in advance, with the balance paid before shipment. We can also accept 100% L/C at sight for qualified orders.

Q: Do you support OEM and ODM services?
A: Yes. We provide comprehensive OEM and ODM services, including logo printing, packaging design, product appearance customization, technical specification adjustments, and function development. Our professional R&D team can help create products tailored to your market needs.

Q: Can you provide customized packaging?
A: Yes. In addition to standard export packaging, we offer customized color boxes, gift boxes, branded cartons, instruction manuals, labels, and private packaging solutions to support your brand development.

Q: What is your warranty period?
A: We provide a one-year warranty for non-human quality issues. Our technical team also offers after-sales support and spare parts assistance to help ensure long-term product performance.

Q: What certifications do your products have?
A: Our factory operates under a strict ISO 9001 quality management system. Products are manufactured according to international standards, and relevant certifications can be provided based on your target market requirements.

Q: Do you supply spare parts?
A: Yes. We provide long-term spare parts support for maintenance and after-sales service. Spare parts can be supplied together with product orders or separately according to customer requirements.

Q: Do you provide market support?
A: Yes. We can provide product photos, videos, technical specifications, catalogs, promotional materials, and marketing suggestions to help you promote products and expand your local market.

Q: Are all products tested before shipment?
A: Yes. Every product undergoes strict inspections and testing before shipment, including raw material inspection, production process control, safety testing, performance testing, and final quality verification.

Q: How do you control product quality?
A: We follow a complete ISO 9001 quality management system. Quality control covers every stage from raw material sourcing, component inspection, assembly, and product testing to final packaging, ensuring consistent and reliable product quality.

Q: What is your production capacity?
A: Our factory is equipped with modern production facilities and stable manufacturing lines, enabling us to support both small-volume trial orders and schedules.

Q: What are your main products?
A: Our main products include gas water heaters, electric water heaters, gas boilers, gas stoves, range hoods, gas ovens, and other kitchen appliances. We continue to develop new products to meet the changing demands of global markets.

Q: Can you provide SKD or CKD solutions?
A: Yes. We have extensive experience supporting SKD and CKD projects. We have successfully cooperated with customers from Vietnam, Pakistan, India, Brazil, Mexico, Turkey, and other countries. SKD and CKD configurations can be customized according to your assembly requirements, helping reduce import duties and improve local production efficiency.

Q: Which markets do you serve?
A: Our products have been exported to North America, South America, Europe, Russia, Africa, Southeast Asia, and the Middle East. Our extensive export experience allows us to provide products and services that meet the requirements of different international markets.

Q: Why choose us?
A: With over 22 years of manufacturing experience, a professional R&D team, strict ISO 9001 quality control, advanced production equipment, comprehensive OEM/ODM capability, and rich export experience, we are committed to providing reliable products, stable supply, and long-term partnership support for customers worldwide.